The VIGI PS30 is a solar system controller with a built-in 31.2Ah/10.8V automotive-grade lithium battery, designed to provide reliable off-grid power for outdoor security cameras and networking equipment.
Its MPPT charging controller improves charging efficiency by up to 20% compared with traditional PWM controllers. Intelligent auxiliary heating helps maintain battery performance in cold conditions, with operation down to -30°C when heating is enabled.
The PS30 supports remote monitoring and management through the VIGI App, VIGI Cloud VMS and VIGI VMS, including battery level, power consumption, firmware updates and remote reboot.
With three DC power outputs, over-charge, over-discharge, over-current, overheat and short-circuit protection, plus an IP66 weatherproof enclosure, the PS30 is designed for reliable outdoor installations.
Key Features
- 31.2Ah / 10.8V automotive-grade lithium battery
- 336.96Wh battery capacity
- MPPT charging controller
- Up to 20% greater charging efficiency than PWM
- Intelligent auxiliary battery heating
- Battery life of more than 500 charge/discharge cycles
- Remaining capacity of over 70% after 500 cycles
- 3 × DC power outputs, up to 12V/2A
- 1 × 10/100 Mbps RJ45 network port
- Remote management via VIGI App, VIGI Cloud VMS and VIGI VMS
- Real-time load and battery level monitoring
- Remote firmware updates and reboot
- Over-charge, over-discharge, over-current, overheat and short-circuit protection
- Removable battery design
- Adjustable mounting angles of 5°, 15°, 25°, 35°, 45° and 55°
- IP66 weatherproof
- Operating temperature from -30°C to 60°C with auxiliary heating
- Suitable for outdoor VIGI security and networking installations
Kit Contents
- VIGI Solar System Controller
- Quick Start Guide
- Waterproof Cable Attachments
- Mounting Accessories
Note: The mounting pole and solar panel are not included and are purchased separately.
Technical
| BATTERY | |
|---|---|
| Type | Lithium |
| Intelligent Auxiliary Heat | Yes |
| Battery Capacity | 31.2 Ah |
| Voltage | 10.8V |
| Max. Output Voltage | 12.6V |
| Life | More than 500 cycles |
| Dimensions (L x W x H) | 242 x 70 x 65mm (9.5 x 2.8 x 2.6in) |
| Charging Condition | 0°C ~ 45°C -30°C ~ 45°C (With intelligent auxiliary heating) |
| Discharging Condition | -20°C ~ 60°C -30°C ~ 60°C (With intelligent auxiliary heating) |
| HARDWARE | |
| Interface |
|
| Indicator LED | Quantity: 4 (1 x SYS Indicator, 1 x LAN Indicator, 1 x PV Indicator, 1 x BAT Indicator) Color: Blue |
| SOFTWARE FEATURES | |
| Load Control | Yes |
| High and Low Temperature Protection | Yes |
| Over-discharge Protection | Yes |
| Power Consumption Statistics | Yes |
| Displays Real-time Load Status | Yes |
| Battery Level Display | Yes |
| Time Zone Selection | Yes |
| Region Selection | Yes |
| Schedule Saving | Yes |
| Firmware Remote Update | Yes |
| Remote Reboot | Yes |
| Local LAN Management | Yes |
| Intelligent Auxiliary Heating Control | -30°C ~ 5°C |
| Account Management | Yes |
| Remote Reset | Yes |
| Remote Message Push | Yes |
| OTHER | |
| Certification | CB, PSE (Battery) CE, FCC, VCCI, IC, IP66 Weatherproof |
| Package Content |
|
| Box Dimensions (W x D x H) | 580 x 320 x 225mm (22.83 x 12.60 x 8.86in) |
| Weight | Package Weight: 9.9 kg |
| Environment | Operating Temperature: -30°C ~ 60°C (With intelligent auxiliary heating) Operating Humidity: 10% ~ 90% RH, Non-condensing |